|
|
|
|
General Characteristics:
- High tech and sturdy air operated valve, with a floating
plug seal, meeting stringent use criteria.
- An extra thick body of the actuator and of the valve, ensuring a good resistance to mechanical and thermal distorsions.
- A modular design enabling the following configurations:
- Shut off valve DCX3 L
- Divert valve DCX4 L/L
- DCX4 T/L
- DCX4 L/T
- DCX4 L/X
- PFA seals quality ensures a complete sealing at high temperature and a good resistance to aggressive products.
- Plastomer seal can be replaced by elastomer seal
- Single or double acting connection
- With plastomer seal, vertical setting up (especially for DCX4)
Dimensions 1” - 1-1/2” - 2” - 2-1/2” - 3” - 4” - 5” - 6” Material
- Body: 316L stainless steel
- Shut-off unit: 316L stainless steel
- Manual or automatic operating devices: 304 stainless steel
- Plug seal: PFA and elastomer
- Stem seal: viton, EPDM, silicone
Options
• Signal back equipment on the top of the actuator
• Sterilization of the stem through an upper guide bearing
• External = 47 RA max (150 grit)
• Internal = 32 RA max (180 grit)
Upgraded finishes upon request:
- Surface Finish
- Variants
- Plug and body machined for a metal to metal sealing (without seal)
- Elastomer sealing (specific plug with viton, EPDM o-ring)
- Manual operator device (instead of the actuator
- Tank bottom type
- Long stroke valve available upon request
|
|
